3 Series E36 318is (M44) COUPE
24 24 001
Adjusting brake band (A4S 270R/310R)
Remove oil drain plug (1) and drain transmission fluid.
Installation:
Top up automatic transmission fluid.
Remove oil sump (1).
Installation:
Clean sealing surfaces.
Use new gasket.
Use new screws (microencapsulated).
Insert all screws until contact is made with screw head in each
case.
Then tighten down all screws in sequence once to specified
tightening torque (24 11 5AZ).
Important!
Do not tighten screws crosswise and do not tighten screws
any further.
Release screws and remove oil strainer (1).
Installation:
Use new oil strainer.
Tightening torque: 24 31 2AZ
RA Adjusting brake band (A4S 270R/310R)
BMW AG - TIS
05.02.2013 08:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -