3 Series E36 318is (M44) COUPE
Installation:
Differential case bearings and backlash are adjusted with
shims (1).
Check O-ring (2), replace if necessary.
Caution!
Changing the total thickness of shims (1) will change the
friction torque value.
After adjustment of the friction torque, torsion face runout and
contact pattern must be readjusted,
refer to 33 12 551
Remove complete limited slip differential.
Installation:
Don't bend the pulse spider.
Press off pulse spider.
Installation:
Press fit pulse generator wheel with special tool 33 1 358
(union ring).
Remove crown wheel (cold).
RA Replacing complete locking differential (Type M) - final drive removed -
BMW AG - TIS
05.02.2013 09:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -