bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Replacing Crankshaft Radial Seal (transmission Side) > < 3 RA Removing And Installing, Sealing Or Replacing Timing Case (M44)|Page 388
Page 1
background image

11 14 141

Replacing radial seal below timing case cover
(M44)

Remove vibration damper,

refer to 11 23 010

Fit Special Tool 11 2 313 on crankshaft.

Screw in Special Tool 11 2 310 so far until it is rigidly connected
with radial sealing ring.

Remove radial sealing ring by tightening in the screw.

Coat sealing lips of new radial sealing ring with oil. 

With Special Tool 11 4 150 and central screw, install radial
sealing ring flush with timing-case cover.

RA  Replacing radial seal below timing case cover (M44)

BMW AG - TIS

06.02.2013  17:15

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Replacing Crankshaft Radial Seal (transmission Side) > < 3 RA Removing And Installing, Sealing Or Replacing Timing Case (M44)|Page 388