3 Series E36 318is (M44) SAL
11 31 091
Removing and installing or replacing chain
tensioning device (M44)
Note:
The hydraulic chain tensioner (M44) can also be fitted to
the M42.
Unfasten screw plug and remove hydraulic chain tensioner.
Note:
The hydraulic chain tensioner can also be removed if the
timing-case cover is removed.
Installation:
If a hydraulic chain tensioner is reused, the oil chamber in the
tensioner unit must first be drained.
Fasten the hydraulic chain tensioner into vice with protective vice
jaws.
Installation:
Slowly and carefully push the hydraulic chain tensioner
together, leaving the lock washer (2) still visible.
Repeat this procedure twice.
RA Removing and installing or replacing chain tensioning device (M44)
BMW AG - TIS
06.02.2013 17:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
