3 Series E36 318is (M44) SAL
11 51 000
Removing and installing / replacing water
pump (M44)
Removing alternator drive belt,
refer to 11 28 010
Release the belt pulley from the water pump.
Drain coolant.
Release water pump.
Insert two M6 screws in water-pump thread and press out water
pump evenly from gear case.
Installation:
Replace sealing ring.
RA Removing and installing / replacing water pump (M44)
BMW AG - TIS
06.02.2013 17:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -