3 Series E36 318is (M44) SAL
Remove complete differential case.
Caution!
Do not bend the pulse generator wheel.
Press pulse generator wheel off of differential case.
Caution!
Do not bend the pulse generator wheel.
Installation:
Press fit pulse alternator wheel using special tool 33 1 304.
Pull taper roller bearing off differential housing with special tool
33 1 300.
RA Replacing both bearings in final drive case (Type K) - final drive removed -
BMW AG - TIS
06.02.2013 22:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -