3 Series E36 318tds (M41) SAL
11 00 050
Removing and installing engine (M41)
Remove transmission,
refer to 23 00 022
Raise engine bonnet to working position:
Caution!
Windscreen wipers must not be switched on after raising
engine bonnet.
Pull out fuse if necessary.
Release and raise engine bonnet.
Caution!
Press hinge above dead centre.
Remove grille cover of air collector. Unfasten cable duct from air
collection box and lay aside.
RA Removing and installing engine (M41)
BMW AG - TIS
06.02.2013 20:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
