3 Series E36 318tds (M41) SAL
Caution!
If the crankshaft has to be rotated one turn while cylinder
head is fitted, first remove the camshaft,
refer to 11 31 001
Tighten down sprocket on injection pump shaft.
Tightening torque,
refer to Technical Data 13 52 2AZ
Note:
Note arrangement of camshaft chain between bolts.
Remove lower plug pin (special tool 11 3 340).
Assemble engine.
Adjusting injection pump,
refer to 13 51 005
RA Replacing both timing chains (M41)
BMW AG - TIS
06.02.2013 20:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -