3 Series E36 318tds (M41) SAL
Unfasten exhaust manifold.
Installation:
Replace seals.
Note arrangement of heat-protection plates and seals; tab
washers face outwards.
Pay attention to washers.
Replace nuts.
Tightening sequence from inside to outside!
Tightening torque,
refer to Technical Data 11 62 1AZ
RA Removing and installing, sealing or replacing exhaust manifold (M41)
BMW AG - TIS
06.02.2013 20:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
