3 Series E36 318tds (M41) SAL
12 41 020
Removing and installing or replacing starter
(M41)
Read fault memory. Switch off ignition.
Note instructions on disconnecting/connecting battery,
refer to General Data HG-12
Disconnect positive battery lead. Remove battery cover.
Disconnect battery ground wire.
Unfasten screw on battery holder. Remove battery.
Unscrew bolts. Remove battery carrier.
Remove splash guard. Unfasten plug connection on reverse gear
switch. Press interlock and remove connector.
RA Removing and installing or replacing starter (M41)
BMW AG - TIS
06.02.2013 21:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -