3 Series E36 318tds (M41) SAL
Disconnect plug connection on injection pump.
Disconnect plug connection (2) of cycle valve on injection pump.
Plug connection (1) is for initial injection sensor on injector of 4th
cylinder.
Unfasten rear retaining screws on injection pump.
Unfasten screw connection for injection pump under bearing
block.
RA Removing and installing/replacing fuel injection pump (M41)
BMW AG - TIS
06.02.2013 21:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
