3 Series E36 318tds (M41) SAL
Secure injection pump to bearing block with nuts (1 and 2) before
unscrewing special tool 13 5 120.
Remove special tool 13 5 120.
Screw in central nut and tighten down.
Tightening torque, refer to Technical Data 13 52 2AZ
Statically adjusting injection pump,
refer to 13 51 005
Note:
After assembly, longer starting time.
Turn engine on starter. The fuel delivery pump is piloted by
the DDE control unit, causing the fuel system to vent
automatically.
RA Removing and installing/replacing fuel injection pump (M41)
BMW AG - TIS
06.02.2013 21:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
