3 Series E36 318tds (M41) SAL
Remove nozzle combination with special tool 13 5 320.
Installation:
Tightening torque, refer to Technical Data 13 53 2AZ
Components of injection nozzle assembly:
1.
Nozzle holder
2.
Nozzle body
3.
Intake bore
4.
Pressure chamber
5.
Nozzle pintle
6.
Leak oil tube
Caution!
The injector nozzle with needle motion sensor (cable) on 4th
cylinder must never be dismantled.
RA Removing and installing or replacing all injection nozzles (M51, M41)
BMW AG - TIS
06.02.2013 21:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -