3 Series E36 318tds (M41) SAL
Unscrew insulation sheet.
Unfasten screws. Remove cover. Take wiring-harness grommet
out of cover.
Installation:
Ensure wiring harness grommet is correctly seated in cover to
prevent any risk of water leaks in installation area for control
unit.
Open locking unit and remove connector from control unit.
Caution!
Always switch ignition off before disconnecting or connecting
connector.
Pull DDE control unit out
Note Data on encoding and replacing control units, refer to BMW
DIS, MoDiC.
RA Replacing control unit (DDE) (M41)
BMW AG - TIS
06.02.2013 21:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
