3 Series E36 318tds (M41) SAL
Lift out circlip (1).
Note:
When removing the sliding sleeve, pressure pieces, balls and
springs drop out.
Remove sliding sleeve for 1st/2nd gear (2).
Note:
Gear on 2nd gear (2) must lie face down and flush with
surface of hydraulic press.
Press guide sleeve (1) off the output shaft and remove.
Remove synchronizer ring for 2nd gear (2).
Remove friction ring (3).
RA Dismantling and assembling all synchronizer units (S5D 200G/ E36 M41)
BMW AG - TIS
06.02.2013 22:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
