3 Series E36 318tds (M41) SAL
32 34 020
Removing and installing or replacing airbag
unit
Warning!
Conform with safety precautions!
Incorrect handling can activate airbag and cause injury.
Disconnect battery and cover negative pole or terminal.
Important!
Steering wheel must be replaced if airbag unit has been
triggered!
Follow procedure after airbag triggering.
Airbag I and basic/central airbag unit:
Release screw.
Pull lower section of steering-column casing off upper section.
Installation:
Check for correct position of lock.
Pull (orange) plug-in connection out of holder on steering column
and disconnect.
RA Removing and installing or replacing airbag unit
BMW AG - TIS
06.02.2013 23:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -