3 Series E36 318tds (M41) SAL
65 81 020
Removing and installing or replacing Multi
Information Display unit
Insert a feeler-gauge blade of approx. 0.9 to 1 mm between frame
and lower shelf. Starting on the right-hand side, depress the
locking lever and lever out the display unit. Pull off connectors.
Installation:
After replacement, the on-board computer must be recoded.
refer to Diagnosis/Encoding
Compact
This operation is identical to removing the clock,
refer to 62 13 050.
Installation:
After replacement, the onboard computer must be recoded,
refer to Diagnosis/Encoding
RA Removing and installing or replacing Multi Information Display unit
BMW AG - TIS
07.02.2013 06:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -