3 Series E36 318ti (M44) COMP
Note:
When crankshaft or main bearing shells are being replaced,
the classification for the arrangement of the main bearing
shells in the crankcase is no longer of significance. Install
yellow main bearing shells in crankcase.
Note:
Guide bearing shell installed at bearing No. 4 is sole means
of axial alignment for crankshaft.
Install guide bearing shell in crankcase.
Install crankshaft.
Note:
The crankshaft is marked with yellow, green or white paint
according to the tolerance of the main journal.
Note:
Place main bearing shells with same color code as that of
crankshaft in main bearing caps.
RA Replacing all main crankshaft bearing shells (M44) (engine dismantled)
BMW AG - TIS
06.02.2013 21:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
