3 Series E36 318ti (M44) COMP
16 14 600
Replacing tank pressure sensor (compact)
Remove rear right side trim panel,
refer to 51 43 000
Release screws, remove cover.
Note:
The expansion tank is secured to the cover.
Unfasten plug connection (1) and disconnect.
Open hose clamp (2) and detach hose. Detach tank pressure
sensor (3) from both retainers.
Installation:
Ensure proper locking of plug connector. Replace hose clip.
RA Replacing tank pressure sensor (compact)
BMW AG - TIS
06.02.2013 22:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -