3 Series E36 318ti (M44) COMP
33 21 000
Removing and installing/replacing left or right
output shaft (compact, Z3)
Remove wheel,
refer to 36 10 300.
Lift out retaining plate.
Unfasten nut.
Installation:
Apply light coat of oil to contact face of nut.
Tightening torque,
refer to Technical Data 33 41 3AZ .
Drive in new retaining plate with special tool 33 1 020.
Unscrew output shaft and tie down to one side.
Installation:
Use washers (1).
Tightening torque,
refer to Technical Data 33 21 1AZ .
RA Removing and installing/replacing left or right output shaft (compact, Z3)
BMW AG - TIS
07.02.2013 01:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -