3 Series E36 318ti (M44) COMP
Build status up to 7/96:
Unfasten left/right screw (1) (limit stops).
Slide upper section (3) to one side, rotate through 90
°
and
remove. Remove clamping section (2).
Build status from 7/96:
Compress left/right limit stop (1) on the recess with plier tips (2)
and remove.
Lift out left/right gate plate cover (1), slide inwards and pull out
through assembly aperture (2).
Completely close folding sunroof (1) with motor or emergency
actuating unit (winder in trunk) until fulcrum pads (2) are in
assembly aperture (3).
RA Removing and installing/replacing extension lever for folding sunroof
BMW AG - TIS
07.02.2013 05:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -