3 Series E36 320i (M50) SAL
Removing cylinder head cover (M50 VANOS)
If applicable, pull connectors off ignition coils.
Unscrew nuts. Remove ignition coils.
Installation:
Check for earth strap of ignition coils at cylinders 3 and 6.
Unscrew cylinder-head cover.
Note:
Cylinder-head cover is separated from cylinder head by
rubber mounts and seals to prevent oscillation.
Check arrangement of cover installation.
1.
Cover nut
2.
Washer
3.
Rubber mount
RA Removing cylinder head cover (M50 VANOS)
BMW AG - TIS
06.02.2013 21:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -