3 Series E36 320i (M50) SAL
Insert bolts and fit clearance-free, but do not tighten yet.
Remove special tool 11 3 290.
Pretighten both chain sprockets, starting on the intake side with
approx. 5 Nm and then tighten in a second pass.
Tightening Torque,
refer to Technical Data 11 31 3AZ
Remove special tool 11 3 240.
RA Replacing camshaft (M50) (intake or exhaust side as applicable)
BMW AG - TIS
06.02.2013 22:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -
