3 Series E36 320i (M52) CONVER
Important!
Do not use special tool 11 2 213 for the new radial seal
version.
Note:
When fitting the end cover with radial seal on the crankshaft, it is
only permitted to use the "support bushing (1)" as an installation
tool.
Lubricate contact face of crankshaft.
Important!
Push on end cover with support bushing (1) straight and
without tilting sideways.
Note:
Screw threads (1) are coated with sealing compound.
Replace screws (1).
Insert all screws and tighten down end cover.
Note:
Keep the support bushing (1) of the new radial seal version as a
"special tool", then render the special tool 11 2 213 unusable
and dispose of it.
The old and new radial seal versions can be installed with the
support bushing (1).
RA Replacing crankshaft radial seal (transmission side)
BMW AG - TIS
06.02.2013 22:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -