3 Series E36 320i (M52) CONVER
Important!
Observe grinding stage of crankshaft.
Installation:
When replacing the bearing shells (also for replacement
crankshaft), classification for bearing shell arrangement in engine
block is waived.
Insert bearing shells with yellow color coding in engine block.
Note:
1.
Install bearing shells with continuous lubricant groove and
one retaining lug in engine block.
2.
Fit bearing shells without continuous lubricant groove and two
retaining lugs in bearing cover.
Note:
The axial guide on the crankshaft is fitted to bearing point 6.
Insert pilot bearing shell in the engine block.
RA Replacing all main crankshaft bearing shells (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
06.02.2013 22:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -