3 Series E36 320i (M52) CONVER
12 14 525
Replacing sensor for cylinder recognition
(M52,S50US,S52)
Interrogate fault memory of DME control unit. Switch off
ignition.
Remove cover from injection valves.
Disconnect plug connection for VANOS solenoid valve on
electrical strip on injector valves.
Unscrew solenoid.
Installation:
Check seal and replace if necessary.
Tightening Torque,
refer to Technical Data 11 36 1AZ.
RA Replacing sensor for cylinder recognition (M52,S50US,S52)
BMW AG - TIS
06.02.2013 22:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -