3 Series E36 320i (M52) CONVER
If necessary, unfasten clips (3 and 4).
Disconnect intake filter housing from mass air flow sensor.
Installation:
Install housing support in rubber mount.
First install intake snorkel.
Interrogate fault memory of DME control unit, check faults in
memory, rectify faults and clear fault memory.
RA Removing and installing intake filter housing (M50,S50US,M52,S52)
BMW AG - TIS
06.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -