3 Series E36 320i (M52) CONVER
Protect threads and edges of manual shift valve shaft with
adhesive tape.
Lubricate sealing lip of radial seal ring with oil.
Push radial oil seal (3) over the adhesive tape up to the case.
Drive radial oil seal (3) in using a suitable sleeve.
The radial oil seal must be flush with the bevel.
Note:
Check ATF level, refer to 24 00 027
RA Replacing radial seal for manual shift valve shaft (A5S 300J)
BMW AG - TIS
07.02.2013 00:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -