3 Series E36 320i (M52) CONVER
Plug type from 01.97:
Press locking clamp (1) away from transmission housing and
remove.
Press plug housing (2) into transmission housing.
Installation:
Note installation position of receptacle housing (1).
Installation:
Replace O-rings (1) and coat with automatic transmission
fluid.
Pull out wire harness through bore in transfer case.
RA Replacing wiring harness for automatic transmission (A4S 270R/ 310R)
BMW AG - TIS
07.02.2013 01:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -