3 Series E36 320i (M52) CONVER
24 52 500
Replacing detent disk (A5S 300J)
Note:
Shift unit removed
Move selector lever to Position "N".
Use open-end wrench (width across flanks 20) to brace selector
lever.
Caution!
When unfastening and tightening nuts, do not twist selector
lever.
Unscrew nuts.
Installation:
Tightening torque, refer to Technical Data 24 52 1AZ
Push up detent spring and remove detent disc from selector shaft.
RA Replacing detent disk (A5S 300J)
BMW AG - TIS
07.02.2013 01:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -