3 Series E36 320i (M52) CONVER
Installation:
Dowel pin must fit in bore.
Lower steering-spindle bearing:
Lift out snap ring (1).
Take off collar (2), spring (3) and support ring (4).
Remove steering spindle.
Installation:
Recess in collar (2) must point to snap ring (1).
Lubricate spring (3) with grease.
Knock lower steering-spindle bearing out of outer tube.
Installation:
Lubricate bearing seat with grease.
Note:
Plug steering-spindle bore with plastic cap.
Removing outer tube of steering column adjustable in height
RA Disassembling and assembling complete steering column
BMW AG - TIS
07.02.2013 02:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -