3 Series E36 320i (M52) CONVER
35 11 001
Replacing mounting block for pedal assembly
Note:
Remove and install mounting block for pedal assembly,
see 35 11 000
Take off locking clips.
Pull brake and clutch pedals off shaft.
Installation:
Make sure locking clips are seated correctly.
Clutch-pedal assembly:
1.
Bearing sleeves - check or replace
2.
Locking clip
3.
Clutch pedal
4.
Grommet for clutch-pedal return spring
5.
Mounting block
Brake-pedal assembly:
1.
Bearing sleeves - check or replace
2.
Brake pedal
3.
Locking clip
4.
Grommet
5.
Mounting block
RA Replacing mounting block for pedal assembly
BMW AG - TIS
07.02.2013 03:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -