3 Series E36 320i (M52) CONVER
Drill out weld spots around inside of entrance.
Expose and open brazed seam in door pillar.
Expose seam in floor assembly.
Drill out weld spots, grind down welding seams.
Expose seam at front and rear jacking points and separate
roughly.
Remove side member cover.
Remove scrap metal.
Straighten and grind joint surfaces.
RA Replacing left or right side member cover (rear side panel removed)
BMW AG - TIS
07.02.2013 04:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -