3 Series E36 320i (M52) CONVER
51 26 050
Removing and installing / replacing switch
(actuator drive) for convertible lid
Open side windows.
Unlock soft top and raise over dead center.
Lift clamping bracket and soft top compartment cover upright.
Lift out guide clip (1) by pulling downwards. Disconnect connecting
rod (2) from joint (3) (actuator drive)(unscrew).
Installation:
Correctly engage guide clip (1) (rattling noise).
Unfasten screws, pull actuator drive (1) backwards to remove and
disconnect connector.
RA Removing and installing / replacing switch (actuator drive) for convertible lid
BMW AG - TIS
07.02.2013 05:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -