3 Series E36 320i (M52) CONVER
Drill out rivets in window guide on C-pillar.
Installation:
The two lower rivets differ in length from the three top ones.
For rivetting, connect blind rivet adapter (repair kit, Sourcing
Reference: BMW Parts Service).
Drill out rivets in support angle.
Remove lower convertible top cover from clamping bracket.
Pull off front cover upwards.
Installation:
Ensure it is firmly seated.
RA Replacing convertible top cover (electric motor/fully-automatic)
BMW AG - TIS
07.02.2013 06:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
