3 Series E36 320i (M52) CONVER
Remove screw for holder of steering-column stalk.
Lever off holder in downwards direction using a screwdriver.
Compress retainers on both sides and pull out lever.
Loosen cable straps on steering column.
Disconnect plug connection.
Installation:
Do not damage self-cancelling cam of turn-indicator lever.
Move turn-indicator lever to middle position, then install.
RA Removing and installing / replacing dip switch for direction of travel
BMW AG - TIS
07.02.2013 07:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -