3 Series E36 320i (M52) CONVER
61 35 160
Removing and installing or replacing rollover
sensor
Caution!
Activating rollover protection system before disassembly,
refer to 54 62 500.
Switch off terminal R!
Before disassembling the control module, terminal R must have
been switched off for at least 1 minute!
Remove headrests,
refer to 52 20 471
Remove rear-seat backrest,
refer to 52 20 000
Unfasten plug connection (1).
Unfasten screws with special tool 00 2 110 and remove rollover
sensor.
Installation:
Replace screws.
RA Removing and installing or replacing rollover sensor
BMW AG - TIS
07.02.2013 07:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -