3 Series E36 320i (M52) CONVER
61 71 010
Removing and installing/replacing left or right
windshield washer spray nozzles
Unfasten internal trim from engine hood beside the spray
nozzle (not on roadster).
Pull off hose.
If necessary, with spray nozzle heated
Pull off connector. Note colors of cables and corresponding pin
sockets.
Remove lines from the connector.
Compress retainer.
Remove spray nozzle.
If necessary, with heated spray nozzle
Work electric leads out of body opening separately.
Installation:
Make sure that there are no bends in the hose after
installation.
Adjust spray nozzles.
RA Removing and installing/replacing left or right windshield washer spray nozzles
BMW AG - TIS
07.02.2013 08:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -