3 Series E36 320i (M52) CONVER
32 00 Wheel Alignment - Normal Position / Inspection Conditions E36 Convertible
Car loaded down to normal position
Vehicle with complete equipment for
normal operation with:
2 x 68 kg on front seats (seats in central
position)1 x 14 kg in luggage
compartment (center) and full fuel tank.
Requirements:
1. Specified rims and tires with even tire
profile (see Wheels/Tires)
2. Correct tire pressure (refer to
instruction plate on vehicle)
3. Specified wheel-bearing play (see
Front/Rear Axle)
4. Ride level check in normal position
(see above) Ride level measurement,
refer to Repair Manual 31 33 095
Warning! Repair vehicle in event of
deviation from specified value (refer to
Troubleshooting Repair Manual)
5. Correct ride level for measurement =
spec. value
±
2mm / M3; Adjust spec.
value
±
1mm by loading or unloading
car.
TD Wheel Alignment - Normal Position / Inspection Conditions E36 / CABRIO
BMW AG - TIS
07.02.2013 12:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -