3 Series E36 323i (M52) CONVER
Unscrew three rear bolts for cylinder head cover mounting.
If necessary, align the camshafts on the hexagon.
Caution!
Do not damage the cylinder head.
If necessary, machine open-end wrench accordingly.
Rotate camshaft until cam tips on intake and exhaust camshafts
of 1st cylinder point towards one another.
Fit special tool 11 3 240 to camshafts on cylinder 6.
Note:
Camshaft setting is OK if special tool 11 3 240 can lie flush
on the cylinder head.
RA Removing and installing/sealing cylinder head (M52 / S52)
BMW AG - TIS
08.02.2013 00:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -