3 Series E36 323i (M52) CONVER
Version without plate spring
Fit thrust washer (1) to the intake camshaft.
Version without plate spring
Tighten down thrust washer (1) with nuts.
Tightening Torque,
refer to Technical Data 11 31 11AZ
Fit shim and screws to the exhaust camshaft.
Fit screws with zero backlash: sprocket remains able to move.
Installing VANOS adjustment unit,
refer to 11 36 010
Assemble engine.
RA Replacing camshaft (M52/S52)
BMW AG - TIS
08.02.2013 00:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -