3 Series E36 323i (M52) CONVER
If necessary, unfasten clips (3 and 4).
Disconnect intake filter housing from mass air flow sensor.
Installation:
Install housing support in rubber mount.
First install intake snorkel.
Interrogate fault memory of DME control unit, check faults in
memory, rectify faults and clear fault memory.
RA Removing and installing intake filter housing (M50,S50US,M52,S52)
BMW AG - TIS
08.02.2013 01:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -