3 Series E36 323i (M52) CONVER
24 24 001
Adjusting brake band (A4S 270R/310R)
Remove oil drain plug (1) and drain transmission fluid.
Installation:
Top up automatic transmission fluid.
Remove oil sump (1).
Installation:
Clean sealing surfaces.
Use new gasket.
Use new screws (microencapsulated).
Insert all screws until contact is made with screw head in each
case.
Then tighten down all screws in sequence once to specified
tightening torque (24 11 5AZ).
Important!
Do not tighten screws crosswise and do not tighten screws
any further.
Release screws and remove oil strainer (1).
Installation:
Use new oil strainer.
Tightening torque: 24 31 2AZ
RA Adjusting brake band (A4S 270R/310R)
BMW AG - TIS
08.02.2013 03:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -