3 Series E36 323i (M52) CONVER
Fit rotor (14) to shaft and install new retaining ring (11).
Install all blades (12) with rounded side facing outwards.
Check that impeller moves easily.
Fit rotor ring (9) and pressure plate (8) to cylindrical pins (10).
Install new O-rings (18).
Fit valve piston (7) and spring (6) and join together the case
sections.
Note:
Note installation location of bore (B).
RA Dismantling and assembling vane pump (LuK/Vickers pump)
BMW AG - TIS
08.02.2013 05:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -