3 Series E36 323i (M52) CONVER
Distance (A):
Loosen nuts (1) and (2) through the panel recesses using Special
Tool 41 6 110.
Loosen the screws (clockwise) through the bores behind the body
molding.
Adjust dimension (A) and tighten lower screws.
Dimension (A) = 22 ... 24 mm
Center position:
By rotating the screws (1) with Special Tool 41 6 110, adjust the
center setting and tighten nuts (1).
Submersion Depth (B):
Loosen screw (3) behind the safety belt, set submersion depth (B)
with end stop and tighten screw back down.
RA Adjusting rear left or right side windows
BMW AG - TIS
08.02.2013 09:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
