3 Series E36 323i (M52) CONVER
Unfasten screw (1) and remove left/right stop (2).
Pull the glued convertible top lid cover (1) off the return edge (do
not pull further, as otherwise the foam will partially separate from
the convertible top lid).
Note:
The foam must remain on the entire surface of the convertible
top lid.
Starting at the front left and right edges (1), carefully pull off the
convertible top lid cover toward the center.
Pull off the entire convertible top lid cover (1). Make sure that the
foam (2) remains on the entire surface of the convertible top lid.
RA Replacing convertible top lid cover
BMW AG - TIS
08.02.2013 10:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -