bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing _ Replacing Both Convertible Top Locks|Page 2442 > < 3 RA Adjusting Electric Drive For Convertible Top Lid|Page 2440
Page 1
background image

54 25 004

Removing and installing / replacing both
convertible top locks

Open side windows.

Lift clamping bracket and soft top compartment cover upright.

Remove tab washers and disconnect Bowden cables.

Press together locking device and lift Bowden cables out from
underneath.

Unfasten screws (3) and remove convertible top lid locks.

With right convertible top lid lock, additional:

Remove luggage compartment trim in center and on left side,

refer to 51 47 140

and 

51 47 151

Expose the lead of microswitch S6 (trunk lid locking mechanism)
in the convertible-top compartment.

Lift out Omega clips.

RA  Removing and installing / replacing both convertible top locks

BMW AG - TIS

08.02.2013  10:41

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing _ Replacing Both Convertible Top Locks|Page 2442 > < 3 RA Adjusting Electric Drive For Convertible Top Lid|Page 2440