3 Series E36 323i (M52) CONVER
Release screws (1) and (2), remove holder.
Installation:
1.
Screw (1)
Tightening torque, 61 61 8AZ .
2.
Screw (2)
Tightening torque, 61 61 9AZ .
Disconnect plug connection at bulkhead/wiper motor.
Unscrew holder of plug-in connection.
Important!
Risk of damage!
Do not push plug-in connection into passenger compartment.
Mask off cowl panel on inside and at edges with plastic sheet or
similar. This prevents the cowl panel from being scratched when
the wiper mounting bracket is removed.
RA Removing and installing complete mounting bracket for windshield wiper system wi
BMW AG - TIS
08.02.2013 12:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -