bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 TD Wheel Alignment - Normal Position _ Inspection Conditions E39, E36, E38 > < 8 TD Rear Axle Wheel Alignment E36 _ SAL, TOUR, COUPE, COMP, CONV _ Standard Suspensi
Page 1
background image

32 00 Wheel Alignment - Normal Position / Inspection Conditions E36  Convertible

Car loaded down to normal position

Vehicle with complete equipment for
normal operation with:

2 x 68 kg on front seats (seats in central
position)1 x 14 kg in luggage
compartment (center) and full fuel tank.

Requirements:

1. Specified rims and tires with even tire
profile (see Wheels/Tires)

2. Correct tire pressure (refer to
instruction plate on vehicle)

3. Specified wheel-bearing play (see
Front/Rear Axle)

4. Ride level check in normal position
(see above) Ride level measurement,
refer to Repair Manual 31 33 095
Warning! Repair vehicle in event of
deviation from specified value (refer to
Troubleshooting Repair Manual)

5. Correct ride level for measurement =
spec. value 

±

 2mm / M3; Adjust spec.

value 

±

 1mm by loading or unloading

car.

TD  Wheel Alignment - Normal Position / Inspection Conditions E36 / CABRIO

BMW AG - TIS

08.02.2013  18:39

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 TD Wheel Alignment - Normal Position _ Inspection Conditions E39, E36, E38 > < 8 TD Rear Axle Wheel Alignment E36 _ SAL, TOUR, COUPE, COMP, CONV _ Standard Suspensi