3 Series E36 323i (M52) COUPE
Spot weld and produce brazed seam.
Spot weld entrance and C-pillar joint so close together that a
welded seam is produced.
Caution!
Always wait until a welded spot has cooled down before
producing an adjacent spot.
Danger of distortion!
Grind down welded surfaces.
Tin out entrance and C-pillar joint and grind down.
RA Replacing outer section of left or right rear wheel housing (side panel removed)
BMW AG - TIS
08.02.2013 10:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -